Trimless LED Front-lit Channel Letters

Trimless LED Front-lit Channel Letters / LED Face-lit Channel letters without trim cap

-Material and Specification:

* 5mm thick Acrylic face.

* Stainless steel sides and backing with paint,brushed or mirror finish

* Waterproof LED moudle inside

* Usually the depth is 70-80mm

* Certification: CE, UL

* Luminous direction: Front lighting

* Stroke limit: The thinnest stroke 15mm

* Size limit: The smallest size 80mm high

* Acrylic color: White, blue, yellow, green, red

* LED Lighting color: White, blue, yellow, green, red, RGB

* Color temperature: 10000K, 6500K, 4500K, 3000K

* Installation method: Mounted to the wall directly

* Apply to both indoor and outdoor signs

* Input Voltage 110-240V

* Output Voltage DC12V

* Lifespan 50, 000hours-Size and color are customized

* With installation parts (pins on the back), installation pattern paper( 1: 1) and wiring diagram

Remarks:

1. All the letters would be welded strongly and nicely.

2. All the welding point would be hidden on the letter top or the letter bottom.

3. All the letters would be clean. No dent, no bump.

4. All the letters would light up properly and lighting effect is good. No shadow, no dots

5. All the letters would be no stracthes, no dirt.

6.All the letters have 100cm long electric cables

7. Screws would be counter-sunk way.

8. All the letters have holes around the face for mounting to the bodies

9. All the letter faces would connect the letter bodies very strongly

10. Transformers would comply with your standards

11. The back-up LEDs and screws would be sent in case of emergency.

12. Shipping cost is based on door- to- door service.

13. Warranty: 5 years for letters, 3 years for LEDs
2. Trade Terms:
-Payment terms: T/T , Western Union or Paypal. 30% deposit in advance and 70% balance before delivery

-Lead time: 7 days

-Shipping freight will be quoted under your requests.
3. Delivery way and time:
-By DHL(door to door service, it takes about 3-5 days to your door)
-By Air(It takes about 4-5 days to the airport near your company)
4. Package:

Each sign has a individual package, and all they will be packed into a strong plywood case with foam inside to prevent any damage in transit.
5. Buyer Reading:

-Our goods is customized according customer’s requirement, before giving the best quotation for you, please advise your detailed requirement as much as you can.
-Your sign design drawing. CDR, AI, EPS or PDF format file are acceptable-If you do not have drawing, please advise the size, material, similar product photo.
-The color of letter(you can choose it on http://www.pantone.net.cn) and lighting way(Front-lit, Back-lit or Reverse-lit, Full-lit and Side-lit);
-The size of letter’s height and width.

Please contact us info@kinhae.com for the prompt quotation.

Share this post